CALL 210-556-1743

Menu





























Two-To-One Link

Instructions for making the two to one jewelry making link using WigJig jewelry tools:
 

Jewelry Making Supplies Required:

Jewelry Making Tools Required

  • About 3 inches of 18 or 20 gauge jewelry wire.

Jewelry Making Skills Required:

Peg pattern for two to one jewelry making link made with jewelry wire and WigJig jewelry tools.



This is a jewelry wire component that we use in many of our designs.  We call it the 2:1 or two-to-one connector.  The instructions for making this link are shown below.

Step-by-step instructions for making the Two to One Jewelry Wire Link using WigJig jewelry tools:

Step 1:  Place pegs 8, 9 and 10 in your WigJig jewelry tool as shown at right.  We make this 2:1 end jewelry wire component using the 3" segments of jewelry wire that we cut in the first step.Peg pattern on WigJig jewelry making tool for making the Two to One jewelry wire link.


Step 2:  Place the initial loop in your 3" segment of jewelry wire on peg 8 and wrap the wire around peg 9 as shown at left.




Step 3:  Continue by wrapping the jewelry wire around peg 10 as shown below left.

Step 4:  Remove your jewelry wire from your WrgJig jewelry tool.  The jewelry wire component should appear as shown below center-left. 

Step 5:  Cut the excess jewelry wire using your flush cutters.  Close the final loop using your bent chain nose pliers.

Step 6:  Using your bent chain nose pliers grasp the jewelry wire at the point where the loops made on pegs 8 and 10 begin and bend the wire 90 degrees.  On the initial loop, bend the jewelry wire 90 degrees counter-clockwise.  On the final loop, bend the wire 90 degrees clockwise.  When completed the jewelry wire component should appear as shown below-right. 

Step 3 to instructions for making the Two to One jewelry wire link, using WigJig jewelry making tools.
Step 4 to instructions for making the Two to One jewelry wire link using WigJig jewelry tools

Step 5 to instructions for making the Two to One jewelry making link made out of jewelry wire shaped by jewelry tools.

Step 6 to instructions for making the Two to One jewelry wire link made out of comon jewelry supplies.
Step 3 Step 4 Step 5 Step 6

Summary of jewelry making project.

The Two to One link is a jewelry wire link using to connect to chains of wire and beads to a single catch or clasp.  This Two to One jewelry link is used in making bracelets or necklaces where you have multiple strands that need to connect in a two to one manner to a single clasp finding.

 

 

 



© 2012 WigJig @ wigjig.com
 

Privacy Policy • All WigJigs and Accessories are patented or patent-pending • All rights reserved ©2018