Double Spirals Jewelry Wire & Beads Bracelet Jewelry Making Project -- Page 4

Step 8:  Remove your wire component from the jig.  Add peg 5 to your pattern and replace the wire component on the jig in the mirror image position.  Wrap the wire around peg 4 and continue pushing until the wire rests adjacent to the empty hole for peg 6 with no pressure applied.  When completed your wire should appear as shown at right. 

Step 9:  We continue the process of adding loops and flipping the wire component over for two more loops.  Remove the wire from your jig.  Add peg 6 to your pattern and replace the wire on the jig in the mirror image position.  Wrap the wire around peg 6 as shown below-left.

Step 10:  Now we make the final loop on the jig.  Remove the wire from the jig and add peg 7 to your pattern.  Replace the wire on your jig in the mirror image position and wrap the wire around peg 6.  Continue pushing the wire until it rests in the position shown below-right with no pressure applied. 

Step 11:  Remove the wire from your jig. 

These instructions continue on the next page.